HunterCat evolves. The HunterCat NFC is here.

Two years after we released the HunterCat, our famous skimmer and card cloner hunter card. Today, together with Salvador Mendoza are happy to announce the Hunter Cat NFC.

The most up-to date security tool for NFC. An evolution of the classic Hunter Cat.

Why choose the Hunter Cat NFC?

Because paying methods have evolved to NFC, cards label “contactless”. Those types of cards that only transmit the transaction information when they get close to the terminal or mPoS (Mobile Point of Sale system).

Are you ready for all the possible security risks that may come?

NFC technology is not only present in bank cards, we can also find it on hotel doors, access controls or even the subway entrance gates, to mention some examples.

Today, NFC technology is all around us and you need a tool that can provide protection as well as auditing capabilities.


What ‘s new?

The new Hunter Cat comes with NFC technology thanks to the PN7150 chip. One of the most recent NFC chips in the market. For this, we created an open source library for Arduino; from which you can configure the card in several mods:

Emulation mode: you can use the Hunter Cat NFC as a card or NFC tag, this mode emulates a card and allows the detection of any card readers. Another example is the ability of storing and replacing several cards or credentials in this device.

Read and write: the Hunter Cat NFC communicates with a passive label, an smart NFC card or NFC device in emulation mode. You can read and write a label. (Although reading is more common than writing due to most labels being protected against writing) In this mode, Hunter Cat NFC generates the RF field whilst the label or card only modulates the field.

Peer to Peer: this mode allows for a bidirectional communication channel between a pair of NFC devices. When a user puts together two devices, both NFC chips establish a P2P connection and start exchanging data.

HunterCat NFC is presented in two interchangeable faces.

Don’t let your information, bank security and assets be exposed.

Purchase the new Hunter Cat NFC from our official store. With a special pre-sale price of $72 dollars. And a special discount for the first 30 by entering the code “HUNTERCAT”.


  • Processor Cortex M0+
  • USB C 2.0
  • NFC Reader, Card and NFC Forum
  • Arduino compatible
  • CircuitPython compatible
  • UF2 Bootloader
  • 3 LEDs status
  • Open Hardware
  • Battery
  • RF protocols supported
  • NFCIP-1, NFCIP-2 protocol
  • ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface
  • NFC Forum T3T via host interface
  • ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP
  • FeliCa PCD mode
  • MIFARE Classic PCD encryption mechanism (MIFARE Classic 1K/4K)
  • NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFAREDESFire
  • ISO/IEC 15693/ICODE VCD mode
  • Includes NXP ISO/IEC14443-A and Innovatron ISO/IEC14443-B intellectual property licensing rights.

1 Comment

  • Lanmi

    August 5, 2022 @ 5:06 pm

    For a EMV read made by hunter cat nfc with PN7150 chip what is the range to read a EMV data thx ! 😀 Continue your services pls ! < 3

    From mitsukir20

Leave a Reply

Your email address will not be published. Required fields are marked *