-10%

Flipper Full Kit

Name: Flipper Full Kit: 5 Add-Ons for Flipper Zero
SKU: EC-PACK-FLIPPER-FULL
Price: 133.00 USD
Availability: InStock

Five Electronic Cats add-ons in one kit: industrial buses, wired networks, WiFi and magnetic stripe, all driven from your Flipper Zero.

Original price was: $148.00.Current price is: $133.00.

In stock

In the box

Flipper Add-On: Modbus board
Flipper Add-On: Ethernet board
Flipper Add-On: CANBus board with its OBD2 cable
Flipper Add-On: Marauder board
Flipper Add-On: MagSpoof board

Not included

The Flipper Zero itself
An Ethernet (RJ45) cable
A USB magstripe reader

You also need

A Flipper Zero — the kit is add-ons only
An Ethernet (RJ45) cable for the Ethernet board
A USB magstripe reader, to read the cards you will emulate

What is the Flipper Full Kit?

The Flipper Full Kit is the complete set of Electronic Cats add-on boards for the Flipper Zero, sold together. Each board plugs into the Flipper’s GPIO port and adds a capability the device does not have on its own: Modbus RTU over RS-485 for industrial buses, wired Ethernet for network work, CAN bus and OBD2 for vehicles, an ESP32-S3 running Marauder for WiFi and Bluetooth analysis, and MagSpoof for magnetic stripe emulation. Every board has its own companion Flipper app and its own open documentation, so you can start with one protocol and move to the next without buying again. Modbus, CANBus and Ethernet run on the official Flipper firmware; MagSpoof is the one that asks for Unleashed.

Read an industrial bus without hauling a laptop

You are auditing a plant line you are authorized to test and need to see what the PLC and its peripherals are actually saying. With the Modbus board you passively sniff the RS-485 bus without interfering, and when you need to probe a response you build and send a request as master from the Flipper itself. No laptop on the factory floor, no extra power supply.

Map a wired network from the socket

On an authorized network audit you plug the Ethernet board into any live RJ45 socket and let the Flipper discover what is on the segment, including LLDP-enabled switches and access points that answer passively. You capture traffic on site and export it as PCAP to open in Wireshark later, which is the part that matters when the building has no WiFi to work from.

Run a workshop where every station is a protocol

One kit covers five protocols, so a class or CTF can rotate groups through stations: Modbus on a bench peripheral, Ethernet on a switch, CAN against a RAMN testbed instead of a real car, WiFi monitoring on a network you own, and magstripe on a reader you control. Every station uses the same Flipper Zero the students already know, and each board keeps its own documentation for them to follow.

Start in 10 minutes

Update your Flipper Zero to the latest official firmware with qFlipper or the official mobile app.
Download the companion app (.fap) for the board you want to use from its GitHub Releases page.
Connect the Flipper over USB and copy the .fap with qFlipper, Flipper Lab or the mobile app with Experimental Options enabled.
Attach the board to the Flipper’s GPIO port and open the app from Apps on the device.
For MagSpoof only, install Unleashed firmware first — the other four boards run on the official firmware.

Boards included	Modbus, Ethernet, CANBus, Marauder, MagSpoof
Host device	Flipper Zero (not included)
Connection	Flipper Zero GPIO port
Industrial bus	Modbus RTU over RS-485
Network controller	ENC28J60 (10BASE-T Ethernet)
CAN controller	MCP2515
Wireless module	ESP32-S3 with Marauder firmware
Magstripe antenna	Coil integrated in the PCB
Flipper firmware	Official, Unleashed (MagSpoof only)
Companion apps	One .fap per board, installed from GitHub Releases

Do I need a Flipper Zero?

Yes. Every board in this kit is an add-on that attaches to the Flipper Zero’s GPIO port and is driven by a companion app on the device. The Flipper Zero is not included.

Which firmware do I need?

Modbus, CANBus and Ethernet run on the official Flipper Zero firmware — keep it up to date. MagSpoof is the exception: it needs non-stock firmware such as Unleashed by DarkFlippers.

Do the apps come preinstalled?

No. The boards ship as hardware; each companion app is a .fap file you download from its GitHub Releases page and copy to the Flipper with qFlipper, Flipper Lab or the mobile app.

Can I test this on a real car or a live network?

On vehicles and networks you own or are authorized to test, yes — the CANBus board reads live engine data and diagnostic trouble codes from an OBD2 port. For practice without touching a real vehicle, the board also works against a RAMN miniature CAN testbed.

Cart